1. cleaning stainless steel products do mildew treatment:
Some finished products and semi-finished products will become moldy after being stored for about a week during the rainy season. In this case, it is recommended to add water-based mildew inhibitor to the final cleaning process of stainless steel products.
In the cleaning water, stir evenly after adding, and clean the stainless steel products according to the normal process.

2. In the packaging can also do mildew treatment
A. directly use the mold-proof non-woven bag packaging stainless steel products, and then put the right amount of mold-proof desiccant in the bag. According to the size of the package, choose different specifications of the anti-mold desiccant.
Or the use of anti-mold package, moisture absorption and release of anti-mold factor sterilization.
B. in the outer box of the packaging, according to the size of the space to put strong anti mildew deodorant tablets.

3. Warehouse environment control
A. it is recommended to put stainless steel products into the warehouse after packing, not directly stacked on the ground, separated by pallets, and not too close to the wall. it is recommended to keep a distance of 15-20cm,
Appropriate retention channels to allow air to circulate, otherwise swirl will be generated, resulting in the formation of water vapor.
B. during plum rains season, warehouses can be sterilized. use anti-mold antibacterial agent to spray walls, doors and windows, shelves and other places. when mopping the floor, add 5% anti-mold antibacterial agent to the water to mop the floor.
c. Install a temperature and humidity meter. When the humidity outside the warehouse is greater than the humidity inside the warehouse, close the doors and windows, and otherwise open the ventilation.

4. Transportation Control
a. Check whether the container is leaking water.
B. stainless steel products exported by sea, pay special attention to the moisture of the container, you can hang a drying rod in the container.
c. Clean the container and load it.